climatevasup.blogg.se - Kodak easyshare printer dock software download

#Kodak easyshare printer dock software download install#
#Kodak easyshare printer dock software download full#
#Kodak easyshare printer dock software download Bluetooth#
#Kodak easyshare printer dock software download plus#
#Kodak easyshare printer dock software download series#

Minimum hardware requirements for either platform are 128-MB RAM (256-MB recommended), 200-MB hard drive space, CD-ROM drive, available USB port (a hub will do), EasyShare 5.1 for WiFi.Macintosh OS X 10.2.8 or higher and Safari 1.0 or higher are also required.Windows 98/98SE/ME/2000/XP with Explorer 5.1 or higher and at least a 233-Mhz processor are required.

#Kodak easyshare printer dock software download install#

To install the driver and run the utility software, Kodak lists the following system requirements: If, for example, you want to mount your images on something like Strathmore's Photo Mount Cards with double-sided tape, a dye sub print won't show any evidence of handling. That's particularly true if your photo project requires handling the photo. If all you want are 4圆 prints, dye sub is the way to go. With no messy inks, dye sub printing is very clean and trouble free. In addition to yellow, cyan and magenta dyes, the ribbon contains a clear coating, which Kodak calls XtraLife Lamination, to protect the dyes from UV light and waterproof them, sealing the dyes into the paper. Temperature controls how much dye transfers at any point on the paper. These are dot-free prints.ĭye sub printing uses a heating element to heat dye impregnated in a ribbon to over 350 degrees, at which point it turns into a gas and migrates into the surface of the specially coated photo paper. These aren't your inkjet's dpi, though, because the density of each dot is variable (somewhat like your monitor's pixels). Prints from the s3 are continuous tone (not screened as on an inkjet), using dye diffusion thermal transfer (photo dye sub) at 300 dpi. Slide shows on a compatible digicam using the digicam's LCD or output to a television via the Video Out port (with remote control available using the optional $17.85 Kodak Remote Control for Printer Dock Plus).Prints 4圆 borderless prints using continuous tone thermal dye transfer without the need for a computer at about 60 seconds a print.

Red-Eye Reduction applied during the printing process.

A button to select 1/2/4/9 images per 4圆 print, providing one 4圆 borderless, two 3x43 bordered, four 2x3 borderless or nine 1.3x2 borderless prints per sheet.

The s3 also supports IrDA infrared communications.

An SD/MMC port to print from those cards (the s3 prints tagged images or the "current" image).

A USB device port to print from a card reader.

#Kodak easyshare printer dock software download full#

USB 2.0 full speed interface to print from a compatible computer.

If you have PictBridge-enabled digicam, you can just connect it with a USB cable plugged into the side of the s3 to print directly from your camera.

#Kodak easyshare printer dock software download Bluetooth#

If you have a Bluetooth 1.1 camphone with Object Push Profile, you can print wirelessly from your phone.

But you do have to buy the $99.95 WiFi card, an SDIO card.

WiFi printing from an EasyShare One camera, a laptop without a network (an Ad Hoc network) or through your router (an Infrastructure network).

Printing connections are only a little less comprehensive than the EasyShare photo printer 500, which adds more card formats:

One-touch picture transfer from a compatible digicam to your computer via USB or WiFiĪ docked Picture Viewer supplies the image.

In-camera battery recharging in less than 3.5 hours.

With a compatible digicam, the s3 provides:

#Kodak easyshare printer dock software download series#

The s3 is not compatible with the CX/DX4000 Series, DX3000 Series and the LS4000 Series digicams.

You need a D-26 adapter for the CX/DS7000 Series, CX/DX6000 Series, LS753, LS743 and LS633 digicams. But you do need the plastic insert, included with those devices, to dock the device easily. You don't need an adapter to use the s3 with the EasyShare-One, C/P/V/Z Series cameras, the Picture Viewer or the LS755. The s3 may only make 4圆 prints, but it's the perfect companion to any of Kodak's newer EasyShare cameras, ImageLink compatible cameras, as well as Kodak's diminutive Picture Viewer.Ĭamera Compatibility. This review, happily, covers those operational tidbits that are hard to find otherwise. The documentation that comes with the s3 is not extensive and, unfortunately, support at Kodak's Web site is minimal, although you can download both the driver software and firmware. The $180 s3 is really a combination camera dock and a printer.

#Kodak easyshare printer dock software download plus#

The EasyShare printer dock plus series 3 (hereafter the s3) - that lower case name is intentional, we're told - has an unrememberable name to go with its unforgettable performance. The Imaging Resource Digital Photography Newsletter WIFI PHOTO PRINTING EasyShare Printer Dock Plus Series 3 Kodak EasyShare printer dock plus series 3 Printer